H8-F12105D
12V LiFePO4 Starting Battery

H8-F12105D 12V LiFePO4 Starting Battery

The H8-F12105D is designed for 12V vehicle starting systems that require a longer H8 battery housing. Featuring 50Ah LiFePO4 capacity, 850A cold cranking current, and a 353 × 175 × 198 mm footprint, it provides an alternative to selected 80Ah lead-acid batteries. Its integrated Battery Management System (BMS) and IP67 protection combine electrical performance with intelligent battery management for compatible automotive applications.

  • H8-F12105D Standard Voltage 12.8V Standard Voltage
  • H8-F12105D Nominal Capacity 50Ah Nominal Capacity
  • H8-F12105D Cold Cranking Amps (CCA) 850A Cold Cranking Amps (CCA)
  • H8-F12105D Protection Rating IP67 Protection Rating

KEY FEATURES

Extended H8 Housing, Smarter Battery Management

A longer battery case does not always mean higher electrical capacity. The H8-F12105D combines the installation dimensions of an H8 battery with a 50Ah LiFePO4 system, offering a distinct fitment option for distributors managing different battery sizes and vehicle applications.

H8-F12105D Ultra-Long Life & Safety

Ultra-Long Life & Safety

Designed with long-term service in mind, the H8-F12105D uses LiFePO4 cells with a stated cycle-life capability of up to 3,000 deep charge/discharge cycles under specified conditions. Its advanced BMS helps coordinate charging and discharging, supporting battery stability and protection throughout repeated operating cycles.

H8-F12105D Smart IoT & OTA Support

Smart IoT & OTA Support

Battery information can be useful beyond the initial installation. Optional Bluetooth, 4G/GPS connectivity, and OTA capabilities allow compatible configurations to support remote monitoring, battery status visibility, and software updates. These options give buyers additional flexibility when planning connected battery applications.

H8-F12105D Smart Power Reserve

Smart Power Reserve

Extended parking periods can place unexpected demands on a vehicle's battery. The H8-F12105D features an intelligent power reserve function designed to retain up to 30% backup energy. By helping limit excessive power depletion, this function supports the availability of stored energy for subsequent starting attempts.

TECHNICAL SPECIFICATIONS

Key Parameters at a Glance

Evaluate the H8-F12105D using its 850A CCA rating, 50Ah nominal capacity, and extended 353 mm housing length, alongside the charging and operating specifications below.

H8-F12105D
Parameter Specification
Model H8-F12105D
Battery Type LiFePO4 Starting Battery
Standard Voltage 12.8V
Nominal Capacity 50Ah
Cold Cranking Amps (CCA) 850A
Dimensions (L × W × H) 353 × 175 × 198 mm
Weight 6.9 kg
Charge Limit Voltage 14.6V
Discharge Cut-off Voltage 10.0V
Continuous Charge Current ≤ 50A
Continuous Discharge Current 50A
Protection Rating IP67
Operating Temperature -20°C to +60°C
Lead-Acid Equivalent 80Ah

FAQ

Frequently Asked Questions

The H8-F12105D is a 12.8V lithium iron phosphate starting battery with 50Ah nominal capacity and 850A cold cranking current. It is designed for compatible 12V automotive starting systems that require an H8-size battery housing.

The primary distinction is its physical size. The H8-F12105D measures 353 × 175 × 198 mm, compared with 242 × 175 × 198 mm for the H5-F12105D and 278 × 175 × 198 mm for the H6-F12105D. All three models have 50Ah capacity and 850A CCA, so selection should focus on vehicle fitment and electrical compatibility rather than housing length alone.

The manufacturer's specifications list an 80Ah lead-acid equivalent. However, replacement suitability must be verified for each vehicle, including starting-current demand, charging-system characteristics, battery tray dimensions, mounting hardware, and terminal configuration.

The battery measures 353 mm long, 175 mm wide, and 198 mm high, with a specified weight of 6.9 kg. These measurements should be checked against the existing battery compartment, particularly where installation clearance is limited.

The H8-F12105D has a charge limit voltage of 14.6V and a maximum continuous charge current of 50A. Its discharge cut-off voltage is 10.0V, with a rated continuous discharge current of 50A. Buyers should verify that the vehicle's charging system is compatible with these limits and the battery's BMS requirements.

The manufacturer's specified operating temperature range is -20°C to +60°C. However, this general range does not establish identical charging and discharging limits at every temperature. Detailed operating conditions should be confirmed for applications involving prolonged cold exposure or high ambient temperatures.

Optional Bluetooth, 4G/GPS modules, and OTA functionality are listed for this model. Depending on the selected configuration, these features may support battery information monitoring, remote vehicle management, and software updates. Buyers should confirm the required connectivity options before ordering.

The integrated BMS helps manage charging and discharging, while the IP67 enclosure rating provides protection against dust and water ingress under specified test conditions. The battery also lists an intelligent reserve function designed to retain up to 30% backup power, helping reduce the risk of excessive energy depletion during vehicle standby.

Find the Right 12V Starting Battery for Your Project

Tell us your existing battery specifications or vehicle requirements. Our team can help match the appropriate LiFePO4 or sodium-ion starting battery.

Find the Right 12V Starting Battery for Your Project