H7-F12135D
12V LiFePO4 Starting Battery

H7-F12135D 12V LiFePO4 Starting Battery

For vehicles requiring greater starting-current capability, the H7-F12135D combines a 75Ah LiFePO4 battery with an impressive 1,200A cold cranking rating. Its H7-size housing, integrated Battery Management System (BMS), and IP67 protection make it a compelling option for compatible 12V starting applications. With a listed 100Ah lead-acid equivalent, it offers distributors a higher-capacity alternative within the established H7 battery format.

  • H7-F12135D Standard Voltage 12.8V Standard Voltage
  • H7-F12135D Nominal Capacity 75Ah Nominal Capacity
  • H7-F12135D Cold Cranking Amps (CCA) 1,200A Cold Cranking Amps (CCA)
  • H7-F12135D Protection Rating IP67 Protection Rating

KEY FEATURES

More Starting Current, Greater Energy Capacity

The H7-F12135D is designed for buyers who need more than a standard-capacity starting battery. Its combination of 1,200A CCA, 75Ah capacity, and intelligent energy management offers a higher-output option without changing the H7 housing dimensions.

H7-F12135D Ultra-Long Life & Safety

Ultra-Long Life & Safety

Higher starting performance should be supported by dependable battery management. The H7-F12135D uses LiFePO4 technology with a stated cycle life of up to 3,000 deep charge/discharge cycles under specified conditions. An integrated BMS helps supervise battery operation, manage charging and discharging, and maintain system stability throughout regular vehicle use.

H7-F12135D Smart IoT & OTA Support

Smart IoT & OTA Support

For fleet operators and distributors exploring connected battery solutions, optional Bluetooth, 4G/GPS modules, and OTA functionality offer additional monitoring possibilities. Compatible configurations can support remote access to battery information and software updates, making it easier to incorporate battery status visibility into vehicle management workflows.

H7-F12135D Smart Power Reserve

Smart Power Reserve

Electrical consumption does not always stop when a vehicle is parked. The H7-F12135D includes an intelligent reserve function designed to retain up to 30% backup power, helping preserve energy for future engine starts. This feature provides an additional safeguard against excessive discharge during periods of vehicle inactivity.

TECHNICAL SPECIFICATIONS

Key Parameters at a Glance

With 75Ah capacity and 1,200A cold cranking current in a 315 × 175 × 198 mm housing, the H7-F12135D provides a higher-output option for compatible H7 battery installations.

H7-F12135D
Parameter Specification
Model H7-F12135D
Battery Type LiFePO4 Starting Battery
Standard Voltage 12.8V
Nominal Capacity 75Ah
Cold Cranking Amps (CCA) 1,200A
Dimensions (L × W × H) 315 × 175 × 198 mm
Weight 7.0 kg
Charge Limit Voltage 14.6V
Discharge Cut-off Voltage 10.0V
Continuous Charge Current ≤ 75A
Continuous Discharge Current 75A
Protection Rating IP67
Operating Temperature -20°C to +60°C
Lead-Acid Equivalent 100Ah

FAQ

Frequently Asked Questions

The H7-F12135D provides 1,200A cold cranking current and 75Ah nominal capacity at 12.8V. These ratings distinguish it from lower-capacity models in the H7 series and make it an option for compatible vehicles with greater starting-current requirements.

Both models use the same 315 × 175 × 198 mm housing. However, the H7-F12135D offers 75Ah capacity and 1,200A CCA, compared with 50Ah and 850A CCA for the H7-F12105D. The H7-F12135D also has a higher listed lead-acid equivalent of 100Ah, versus 80Ah for the H7-F12105D.

The manufacturer's specifications list the H7-F12135D as a 100Ah lead-acid equivalent. Replacement suitability depends on the vehicle's electrical requirements, charging-system compatibility, physical battery dimensions, terminal arrangement, and mounting design. These factors should be verified before installation.

The battery measures 315 × 175 × 198 mm and weighs approximately 7.0 kg. Its dimensions correspond to the H7 housing format used in this product series, but buyers should still confirm terminal layout, hold-down compatibility, and available installation clearance.

The H7-F12135D has a charge limit voltage of 14.6V and a discharge cut-off voltage of 10.0V. Its maximum continuous charge current is 75A, and its rated continuous discharge current is 75A. Vehicle charging-system compatibility must be checked before use.

The product is rated at 1,200A CCA and has a specified operating temperature range of -20°C to +60°C. However, actual cold-weather performance depends on battery condition, vehicle requirements, and temperature-specific operating limits. Buyers should confirm the applicable CCA test standard and detailed low-temperature specifications when evaluating cold-climate applications.

Optional Bluetooth, 4G/GPS connectivity, and OTA functions are listed in the product information. Depending on the selected configuration, these features can support battery monitoring, remote vehicle management, and software updates. Availability should be confirmed when requesting a quotation.

The integrated Battery Management System (BMS) helps control charging and discharging, while the IP67 enclosure rating provides protection against dust and water ingress under specified test conditions. The intelligent reserve function is also designed to retain up to 30% backup power, helping reduce the risk of excessive battery depletion during standby periods.

Find the Right 12V Starting Battery for Your Project

Tell us your existing battery specifications or vehicle requirements. Our team can help match the appropriate LiFePO4 or sodium-ion starting battery.

Find the Right 12V Starting Battery for Your Project